View Cart
Update Quantities
Continue Shopping
Applying Glide Wax Page2

Brush with a medium coarse brush to "open" the base and remove surface oxidation.
Iron on a layer of soft glide wax and scrape with Plexi scraper while still warm. This removes hair and accumulated dirt.

Apply wax for today’s conditions. Use the iron, dripping wax on both sides of the groove. When ironing the wax, it should melt easily. Keep iron moving from tip to tail.
Note: The wax should melt easily, but the temperature must not be so high that smoke
develops. Keep the iron moving in a steady motion.

Allow wax to cool. Scrape and brush. Repeat wax, scrape & brush 3 to 5 times.

Don't forget to remove all excess wax in the groove and on the sides with a scraper. We
recommend scraping the groove before the base to protect the surface in case the groove scraper slips and makes scratches.

Do the final brushing with a soft brush and polish with Swix polishing fibertex.

Home | Products | Ski Data | Wax Book | Ralph's Blog | SRG News | About Us | Contact Us

©2019 Eagle River Nordic. All Rights Reserved.
PO Box 936, Eagle River, WI 54521
ORDERS: 1-800-423-9730 | FAX: 715-479-2208

Disclaimer: All information deemed reliable but not guaranteed and should be independently verified. Eagle River Nordic and
By Request Web Designs shall not be responsible for any typographical errors, misinformation, misprints and shall be held totally harmless.

Site Design by By Request Web Designs |